4 1 4 2 crystal oscillator crystal oscillator soj high-frequency crystal oscillator sg-615 / 531 / 51 series product number (please refer to page 2) q 3 3 6 1 5 x x x x x x x 0 0 q 3 2 5 3 1 x x x x x x x 0 0 q 3 2 5 1 0 x x x x x x x 0 0 ? high-density mounting-type smd. ? cylindrical at crystal unit builtin, thus assuring high reliability. ? low current consumption by output enable function (oe) or standby function ( s _____ t ). ? pin compatible with full-size metal can. (sg-51 series) ? pin compatible with half-size metal can. (sg-531 series) ? available for lead (pb)-free soldering. ? available for lead (pb)-free terminal. specifications (characteristics) external dimensions (unit: mm) recommended soldering pattern (unit: mm) 1 oe or st 2 gnd 3 out 4 v dd no. #1 #2 #4 #3 8.65 0.25 9.8 max. 4.7 max. 4.06 0.25 min. 14.0 max. 5.08 7.62 0.51 20.0000m sg-615p c 9352a e pin terminal sg-531 series sg-615 series sg-51 series 1 oe 7 gnd 8 out 14 v dd no. #14 #8 #1 #7 5.3 max. 2.54 min. 0.2 min. 6.36 SG51P 9353b e 16.0000mhz c 15.24 0.51 0.25 90 to 105 7.62 19.8 max. pin terminal 1 oe or st 4 gnd 5 out 8 v dd no. #1 #4 #8 #5 0.2 min. sg531ptjc 60.0000m 9353b e 5.3 max. 2.54 min. 7.62 0.51 0.25 90 to 105 7.62 13.7 max. 6.6 pin terminal note. oe pin (p, ptj, ph, ptw, phw, pcw, pcn) oe pin - "h" or "open" : specified frequency output. oe pin - "l" : output is high impedance. st pin (stw, shw, scw) st pin - "h" or "open" : specified frequency output. st pin - "l" : output is low level (weak pull - down), oscillation stops. 1.3 3.0 8.8 5.08 item symbol specifications remarks sg-615p sg-531p sg-51p sg-615ptj sg-531ptj sg-51ptj sg-615ph sg-531ph sg-51ph output frequency range f 0 1.0250 mhz to 26.0000 mhz 26.0001 mhz to 66.6667 mhz refer to operating condition and frequency range power source voltage max. supply voltage v dd -gnd -0.3 v to +7.0 v -0.5 v to +7.0 v operating voltage v dd 5.0 v0.5 v temperature range storage temperature t stg -55 c to +125 c stored as bare product after unpacking operating temperature t opr -20 ?c to +70 ?c (-40 ?c to +85 ?c) refer to operating condition and frequency range frequency stability f/f 0 b: 50 x 10 -6 c: 100 x 10 -6 refer to operating condition and frequency range current consumption iop 23 ma max. 35 ma max. no load condition output disable current i oe 12 ma max. 28 ma max. 20 ma max. oe = gnd duty t w / t 40 % to 60 % C 40 % to 60 % cmos load: 1/2 v dd 45 % to 55 % C ttl load: 1.4 v output voltage v oh v dd -0.4 v min. 2.4 v min. v dd -0.4 v min. i oh = -400 a (p,ptj) / -4 ma (ph) v ol 0.4 v max. i ol = 16 ma (p) / 8 ma (ptj) / 4 ma (ph) output load condition (fan out) cl 50 pf max. C 50 pf max. n 10 ttl max. 5 ttl max. C c l 15 pf output enable / disable input voltage v ih 2.0 v min. 3.5 v min. 2.0 v min. i ih = 1 a max. (oe = v dd ) v il 0.8 v max. 1.5 v max. 0.8 v max. i il = -100 a min. (oe = gnd) , ptj : i il = -500 a min. (oe = gnd) output rise time t r 8 ns max. C 7 ns max. cmos load: 20 % 80 % v dd 5 ns max. C ttl load: 0.4 v 2.4 v output fall time t f 8 ns max. C 7 ns max. cmos load: 80 % 20 % v dd 5 ns max. C ttl load: 2.4 v 0.4 v oscillation start up time t osc 4 ms max. 10 ms max. time at 4.5 v to be 0 s aging fa 5 x 10 -6 / year max. ta = +25 ?c, v dd = 5 v, first year shock resistance s.r. 20 x 10 -6 max. three drops on a hard board from 750 mm or excitation test with 29400 m/s 2 x 0.3 ms x 1/2sine wave in 3 directions note: ? unless otherwise stated, characteristics (specifications) shown in the above table are based on the rated operating temperature and voltage condition. ? external by-pass capacitor is recommended. operating condition and frequency range sg-615/531/51p sg-615/531/51ptj/ph sg-615/531ptw/stw/phw/shw 26 1.025 55 135 sg-615/531/51p sg-615/531/51ptj/ph sg-615/531ptw/stw/phw/shw 26 1.025 135 sg-615/531pcg/scg sg-615/531pcw/scw 66.6667 66.6667 26 135 1.5 sg-615pcn operating voltage frequency stability(operating temperature) 1 mhz 50 mhz 100 mhz 150 mh z 5 v 0.5 v 3.3 v 0.3 v b: 50 x 10 -6 ( -20 c to +70 c) c: 100 x 10 -6 ( -20 c to +70 c) b: 50 x 10 -6 c: 100 x 10 -6 ( -20 c to +70 c) m: 100 x 10 -6 ( -40 c to +85 c) sg-51 actual size sg-531 sg-615
4 1 4 2 crystal oscillator specifications (characteristics) item symbol specifications remarks sg-615pcg sg-531pcg sg-615scg sg-531scg sg-615pcn nominal frequency range f 0 1.5000 mhz to 26.0000 mhz 26.0001 mhz to 66.6667 mhz refer to operating condition and frequency range power source voltage max. supply voltage v dd -gnd -0.5 v to +7.0 v operating voltage v dd 2.7 v to 3.6 v 3.0 v to 3.6 v temperature range storage temperature t stg -55 oc to +125 oc stored as bare product after unpacking operating temperature t opr -40 oc to +85 oc refer to operating condition and frequency range frequency stability f/f 0 b : 50 x 10 -6 c : 100 x 10 -6 -20 c to +70 c m : 100 x 10 -6 -40 c to +85 c current consumption i op 12 ma max. 30 ma max. no load condition output disable current i oe 10 ma max. C 15 ma max. oe = gnd (pcg / pcn) standby current i st C 50 a max. C s ____ t = gnd (scg) duty t w / t 45 % to 55 % 50 % v dd , cl = max. output voltage v oh vdd -0.4 v min. 2.2 v min. i oh = -8 ma output load condition v ol 0.4 v max. 0.4 v max. i ol = 8 ma c l 25 pf 15 pf output enable / disable input voltage v ih 0.7 v dd min. 0.7 v dd min. oe, s ____ t v il 0.2 v dd max. 0.3 v dd max. oe, s ____ t output rise time t r 4.0 ns max. 7 ns max. 20 % 80 % v dd , cl max. output fall time t f 4.0 ns max. 7 ns max. 80 % 20 % v dd, cl max. oscillation start up time t osc 12 ms max. 10 ms max. time at minimum operating voltage to be 0 s aging fa 5 x 10 -6 / year max. ta = +25 oc, v dd = 3.3 v first year shock resistance s.r. 20 x 10 -6 max. three drops on a hard board from 750 mm or excitation test with 29400 m/s 2 x 0.3 ms x 1/2sine wave in 3 directions specifications (characteristics) item symbol specifications remarks sg-615ptw / stw sg-531ptw / stw sg-615phw / shw sg531phw / shw sg-615pcw / scw sg-531pcw / scw nominal frequency range f 0 55.0001 mhz to 135.0000 mhz 26.0001 mhz to 135.0000 mhz refer to operating condition and frequency range power source voltage max. supply voltage v dd -gnd -0.5 v to +7.0 v operating voltage v dd 5.0 v 0.5 v 3.3 v 0.3 v temperature range storage temperature t stg -55 oc to +100 oc stored as bare product after unpacking operating temperature t opr -20 oc to +70 oc -40 oc to +85 oc refer to operating condition and frequency range frequency stability f/f 0 b : 50 x 10 -6 c : 100 x 10 -6 -20 c to +70 c C m : 100 x 10 -6 -40 c to +85 c current consumption i op 45 ma max. 28 ma max. no load condition output disable current i oe 30 ma max. 16 ma max. oe = gnd (p ? w) standby current i st 50 a max. s ____ t = gnd (s ? w) duty t w / t 40 % to 60 % 45 % to 55 % C C C C ttl load : 1.4 v, cl = max. ttl load : 1.4 v, 5ttl + 15 pf, fo 66.6667 mhz C C C 40 % to 60 % 45 % to 55% C 40 % to 60 % C 45 % to 55 % cmos load : 50% v dd , cl = max. cmos load : 50% v dd , cl = 25 pf, fo 66.6667 mhz cmos load : 50% v dd , cl = 25 pf, fo 40.0 mhz output voltage v oh v dd -0.4 v min. i oh = -16 ma ( ? tw / ? hw) / -8 ma ( ? cw) v ol 0.4 v max. i ol = 16 ma ( ? tw / ? hw) / 8 ma ( ? cw) output load condition c l 15 pf 5 ttl + 15 pf 25 pf C C C C C C fo 135 mhz fo 90 mhz fo 66.6667 mhz C C C C 15 pf 25 pf 50 pf C 15 pf C C 30 pf fo 135 mhz fo 125 mhz fo 66.6667mhz fo 40.0 mhz output enable / disable input voltage v ih 2.0 v min. 0.7 v dd min. oe, s ____ t v il 0.8 v max. 0.2 v dd max. oe, s ____ t output rise time t r 2.0 ns max. 4.0 ns max. C C C C ttl load: 0.8 v 2.0 v, cl = max. ttl load: 0.4 v 2.4 v, cl = max. C C C 3.0 ns max. C 4.0 ns max. C 3.0 ns max. 4.0 ns max. cmos load: 80 % 20 % v dd , cl = 25 pf cmos load: 80 % 20 % v dd , cl = 15 pf cmos load: 80 % 20 % v dd , cl = max. output fall time t f 2.0 ns max. 4.0 ns max. C C C C ttl load: 2.0 v 0.8 v, cl = max. ttl load: 2.4 v 0.4 v, cl = max. C C C 3.0 ns max. C 4.0 ns max. C 3.0 ns max. 4.0 ns max. cmos load: 80 % 20 % v dd , cl = 25 pf cmos load: 80 % 20 % v dd , cl = 15 pf cmos load: 80 % 20 % v dd , cl = max. oscillation start up time t osc 10 ms max. time at minimum operating voltage to be 0 s aging fa 5 x 10 -6 / year max. ta = +25 oc, v dd = 5.0 v / 3.3 v, first year shock resistance s.r. 20 x 10 -6 max. three drops on a hard board from 750 mm or excitation test with 29400 m/s 2 x 0.3 ms x 1/2sine wave in 3 directions
|
